Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.
 
 RECOVERY EQUIPMENT
Snatch Blocks
  An ARB snatch block increases the versatility of a vehicle mounted or portable winch. It enables you to retrieve loads that are double a winch's capacity by reducing the load on the winch by half, and facilitates winching from varying angles when straight ahead isn't the best option.

It enables you to retrieve loads that are double a winch's capacity by reducing the load on the winch by half, and facilitates winching from varying angles when straight ahead isn't the best option.


 Single Line Pull


 Double Line Pull
(Use of snatch block halves winching effort)


 Triple Line Pull
 
(Use of 2 snatch blocks provides additional winching advantage)
 

When choosing a snatch block, care should be taken to ensure it has been well manufactured from high quality components. A poorly designed block can have a detrimental effect on a winch's cable, and lead to a failure of the wire rope or the snatch block itself.

ARB snatch blocks feature side plates that sit snug against the pulley, eliminating the possibility of the winch cable becoming trapped between the pulley and side plates. The groove on the pulley itself tapers down to the centre allowing for a variety of cable sizes to be used and ensures the cable is seated securely in the pulley, minimising lateral movement.

The ARB snatch block is a formidable piece of recovery equipment that should be included in every recovery kit.
 
 


 

 
    Specifications:
 

part number:

ARB209 10100020
  working load: 7000kg 9000kg
  breaking strain: 14,500kg 17,500kg
  side plate material: 5mm cold rolled steel 6mm cold rolled steel
  pulley material: solid billet steel specialised polymer
  pulley diameter: 93mm 110mm
  cable size: 6mm - 12mm 8mm - 13mm
  weight: 3.5kg 2.4kg
  greasable: yes not required
       

Back to the ARB Recovery Equipment home page ...        

 

 

Site Map - Catalogue - Privacy/Legal - Webmaster