ARB Bull Bars

Vital for rural and remote area travel, ARB bull bars will provide substantially improved protection for vulnerable mechanical components against animal strikes whilst providing a solid base for mounting other accessories like driving lights, winches and CB antennas.

ARB bars are superbly engineered and manufactured to not only maintain maximum functionality, but also to ensure they complement the look of the vehicle.

Features

  • Vehicle specific design suitable for the MY22 Ford Ranger
  • Registered design of styling and design components
  • Durable steel construction for maximum protection
  • Incorporates ARB’s renowned multi fold upswept and tapered wing design for optimum strength and approach angle
  • 30mm radius on wings and centre section
  • 60.3mm outer frames and centre cross tube
  • Engineered, air bag compatible mounting system secures to the chassis via high tensile bolts
  • Split pan design for maximum strength and airflow
  • Extensive protection panels on centre and either side
  • Pressed form top pan and aluminium (powder coated matt black) winch cover panel
  • Twin ARB Jack or Hi-Lift Jack points located in the lower pan
  • Two aerial brackets located on the centre frame
  • Will accommodate Warn, Magnum, Bushranger, Smittybilt low mount model electric winches up to 10,000lb
  • Provision to accommodate ARB Intensity and Intensity Solis LEDs and a range of Bushranger and IPF lights
  • Includes ARB LED fog light, LED daytime running light and LED sequential indicators and clearance lights
  • Compatible with original equipment safety features (refer below)
  • Bar adds approximately 165mm to the overall length of the vehicle
  • Approximate weight of the bar, chassis mounts and fitting kit is 79kg. Approximately 17kg is removed from the vehicle for fitment of the bar
  • Metaprep primer for additional corrosion resistance
  • Finished in matt black powder coat

Features

  • Vehicle specific design suitable for the MY22 Ford Ranger
  • Registered design of styling and design components
  • Durable steel construction for maximum protection
  • Incorporates ARB’s renowned multi fold upswept and tapered wing design for optimum strength and approach angle
  • 30mm radius on wings and centre section
  • 60.3mm outer frames and centre cross tube
  • Engineered, air bag compatible mounting system secures to the chassis via high tensile bolts
  • Split pan design for maximum strength and airflow
  • Extensive protection panels on centre and either side
  • Pressed form top pan and aluminium (powder coated matt black) winch cover panel
  • Optional polished tube kit or textured black tube kit with integrated 20” LED light bar (requires ARB loom PN 3500810)
  • Twin ARB Jack or Hi-Lift jack points located in the lower pan
  • Two aerial brackets located on the centre frame
  • Will accommodate Warn, Magnum, Bushranger, Smittybilt low mount model electric winches up to 10,000lb
  • Provision to accommodate ARB Intensity and Solis LEDs and a range of Bushranger and IPF lights
  • Includes ARB LED fog light, LED daytime running light and LED sequential indicators and clearance lights
  • Compatible with original equipment safety features (refer below)
  • Bar adds approximately 165mm to the overall length of the vehicle
  • Approximate weight of the bar, chassis mounts and fitting kit is 75kg. Approximately 17kg is removed from the vehicle for fitment of the bar
  • Metaprep primer for additional corrosion resistance
  • Finished in matt black powder coat

Features

  • Meets full Australian Standard AS 4876.1-2002. Including 3.2 Road User Protection
  • Weight savings provide improved fuel economy and reduced tyre, suspension and brake wear when compared to other alternatives
  • Suits all vehicle variants except Raptor
  • Superior frontal protection, due to the impact absorbing hollow construction
  • Airbag compatible
  • Compatible with all Ford safety and ADAS features
  • Compatible with SmartBar Under Vehicle Armour
  • Compatible with ARB Under Vehicle Protection
  • Compatible with ARB Forged Recovery Points
  • Removable high lift jack points available as an option with winch bars
  • Antenna mount bracket supplied
  • Accommodates a large range of driving lights, including ARB Intensity Solis and Bushranger Night Hawk 9″ & 7″ driving lights
  • Winch bar accommodates up to 10,000lb winch, is compatible with Bushranger Revo, Warn Zeon and Evo winches
  • Styled to maintain the vehicle’s aesthetic appearance
  • Proudly designed and manufactured in Australia
  • Minimal repair costs after impact
  • Minimal maintenance
  • UV stabilised polymer for durability
  • Manufactured from environmentally friendly, recyclable polyethylene polymer
  • Available in black as standard, other colours available for large order quantities
  • Bar adds 250mm to vehicle length
  • Approach angle of 25o on centreline
  • Side wing under body protection
  • Under centre cover included to protect under the vehicle between the chassis rails
  • Not compatible with fitment of light bars

Features

  • Meets full Australian Standard AS 4876.1-2002. Including 3.2 Road User Protection
  • Weight savings provide improved fuel economy and reduced tyre, suspension and brake wear when compared to other alternatives
  • Suits all vehicle variants except Raptor
  • Superior frontal protection, due to the impact absorbing hollow construction
  • Airbag compatible
  • Compatible with all Ford safety and ADAS features
  • Compatible with SmartBar Under Vehicle Armour
  • Compatible with ARB Under Vehicle Protection
  • Compatible with ARB Recovery Points
  • Removable high lift jack points available as an option with winch bars
  • Antenna mount bracket supplied
  • Accommodates a large range of driving lights, compatible with ARB Intensity Solis and Bushranger Night Hawk 9″ & 7″
  • Not compatible with light bars
  • Winch bar accommodates up to 10,000lb winch. Bar is compatible with Bushranger Revo, Warn Zeon and Evo winches
  • Styled to maintain the vehicle’s aesthetic appearance
  • Proudly designed and manufactured in Australia
  • Minimal repair costs after impact
  • Minimal maintenance
  • UV stabilised polymer for durability
  • Manufactured from environmentally friendly, recyclable polyethylene polymer
  • Available in black as standard, other colours available for large order quantities
  • Bar adds 230mm to vehicle length
  • Approach angle of 27o on centreline
  • Side wing under body protection
  • Under centre cover included to protect under the vehicle between the chassis rails
top