*Whilst we make continuous effort to ensure accuracy with the product photo or vehicle shown, please consult an ARB expert if you are unsure if this product is right for you.

PRODUCT CODE: base-rack-accessories

ARB BASE Rack Accessories

The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation.

Sold as a Single item

Set Location

Zip Pay Available. Learn More

3 Years Warranty

ARB BASE Rack Accessories

BASE RACK ACCESSORIES

The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own.

Adding, removing and repositioning accessories and roof loads is quick and simple with the BASE Rack’s dovetail system, making it easier to install and remove individual items without disturbing any other cargo or lashing points.

LIGHT BARS

Wind Deflector

Awning Bracket

Hi-Lift Jack Holders

Recovery Board Holder

Roller Kit

Gas Bottle Holder

Jerry Can Holders

Spare Wheel Y-Strap

Ratchet Straps

TIE-DOWNS

T-Slot Adaptor

BASE RACK WIRING

AUXILIARY LIGHT

SHOVEL HOLDER

EXPLORE ACCESSORIES

ROOF RACK LIGHT BAR

Complementing the sleek design and mounting system of the BASE Rack, the ARB Roof Rack Light Bar utilises the simple mounting system of the BASE Rack allowing it to be quickly and easily setup.

Sitting at 954mm wide, the mounting system allows for the light bar to be installed either proud of the rack or nicely tucked up underneath.

FEATURES

Unique reflector design provides optimum distance and width for highway driving
Reflector design limits light being reflected off vehicle bonnet and bar work
Combo beam technology provides excellent mid- to long-range spread as well as distance down the road
Virtually indestructible polycarbonate lens
Extruded aluminium body with stealth black powder-coat finish
Unique multi-position mounts suitable for BASE Rack, as well as ARB trade and touring racks
Brackets included provide two mounting options allowing for placement either in front of or below the rack
304 stainless hardware
Reverse polarity protection
Breather with pressure-tested seal
Vibration and UV tested
Thermal management
Dust and waterproof to IP68
Over and under voltage protection
Protected against radio frequency (RFI) and electromagnetic (EMC) interference
Two-pin, over-moulded, waterproof plug
Suitable for use with ARB driving light loom – 3500810 & 3500820
R10, CE and ROHS certified
Three-year warranty

WIND DEFLECTOR

No longer will there be the fear of additional cabin noise when fitting a roof rack. ARB’s engineers have formed an underside mounting wind deflector, ensuring a quiet and enjoyable driving experience.

FEATURES

1.6mm press-formed aluminium
Press-form shape provides rigidity and strength and aids noise reduction (if you want fancy technical words: it works to reduce vortex shedding effects)
Durable powder-coat finish
Vehicle specific
Pre-cut slots to aid fitment of front-mounted roof rack light bar
Significantly reduces wind noise associated with roof racks (almost eliminates it on most vehicles)

Read Less

QUICK-RELEASE AWNING BRACKET

Allowing your awning to be removed from the rack in next to no time by loosening the fasteners before making a ‘slide and lift’ manoeuvre, the Quick-Release Awning Bracket offers additional flexibility in mounting with a ‘high’ and ‘low’ position to suit your vehicle.

FEATURES

Allows fitment of ARB’s awning range
Can attach to the dovetail track on the perimeter of the rack
Quick-release bracket allows your awning to be removed in no time
Made from strong, powder-coated steel

AWNING BRACKET

Mount your ARB awning securely. The Awning Bracket allows quick fitment of your awning – meaning you spend less time at home packing and prepping and more time at your destination enjoying the great outdoors!

FEATURES

Allows fitment of ARB’s awning range
Easy to attach to the BASE Rack – simply secure onto the dovetail track on the rack
Can attach to the dovetail track at any point on the rack
Height adjustable
Made from strong, powder-coated steel

BASE RACK HEAVY DUTY AWNING BRACKET

If you’ve got an awning and need brackets to support it, the heavy duty awning mount means you can securely attach an awning weighing up to 30kg to the BASE Rack.

FEATURES

Designed to suit 270° awnings
Integrated eye nut tie-down points
Quick-release slots for easy install and removal

High and low mount position
Attaches to the sides and cross beams of ARB Base Rack
Brackets are made from stronger powder-coated steel

HI-LIFT JACK HOLDERS

An off road jack is a 4WDer’s best friend. When you’re out on the tracks you want easy access to your jack and the Hi-Lift™ Jack holder ensures your jack is always at hand. Available in both Classic for simple jack attachment and Premium for quick release and added security.

PREMIUM

The Premium Jack Holder incorporates two hinged cradles which secure the jack to the rack and can be opened while the jack is resting inside. It also incorporates provisions for a padlock to secure the jack to your vehicle. Just like the Classic, the Premium jack holder can be mounted in either the foot up or foot down position, as well as offering a range of height adjustability.

PREMIUM HOLDER FEATURES

Allows easy fitment of a Hi-Lift Jack™ to your BASE Rack
Can attach to the dovetail track anywhere on the perimeter
Made from strong, powder-coated steel
Padlock provision for added security
Quick-release loading and unloading of jack

CLASSIC JACK HOLDER

The Classic jack holder keeps the jack secure with two eye bolts attached directly to the dovetail and allows the jack to be mounted in either the foot up or foot down position.

CLASSIC JACK HOLDER FEATURES

Allows easy fitment of a Hi-Lift Jack™ to your BASE Rack
Can attach to the dovetail track anywhere on the perimeter
Made from strong, corrosion-resistant steel
Includes rubber handle keeper

RECOVERY BOARD HOLDER

When you’re stuck in the sand, you want to be able to access your recovery tracks quickly so you can get on with your adventure. The Recovery Board Holder is a 4 piece fastening kit which is equally suitable for use with TRED Pro and MaxTrax mounting systems.

FEATURES

Allows easy fitment of recovery boards onto the BASE Rack
Can attach to the dovetail track at any point on the rack
Made from strong, corrosion-resistant steel
To be used with track manufacturer’s mounting hardware
Suitable for use with ARB TRED Pros and MaxTrax (product specific mounting hardware sold separately)

ROLLER KIT

Loading long pieces of timber and other heavy items can be tricky when you’re alone, but adding a roller to the end of your BASE Rack will alleviate this. The roller helps your equipment to glide onto the rack ready for you to secure and get on your way.

Available in two sizes to suit the standard and narrow racks, the Roller Kit can be attached to any section of the dovetail around the outer perimeter of the rack.

FEATURES

Allows easy loading onto your BASE Rack
Can attach to the dovetail track anywhere on the perimeter
Made from powder-coated aluminium
Makes long, heavy items easy to load safely onto the roof rack
Full-width, low-profile roller

Available sizes

1,025mm
1,185mm

GAS BOTTLE HOLDER

Keeping a gas bottle safe and secure is a must when travelling. Attaching and removing your gas bottle is a breeze with the gas bottle holder. It’s perfect for carrying up to a 9kg gas bottle, comes complete with the base, ratchet strap and two fixing eye bolts and can be secured to an individual beam or span between beams.

FEATURES

Allows easy fitment of a gas bottle to your BASE Rack
Suits gas bottles between 2kg – 9kg
Secures to an individual beam or spans between beams
Eye bolts and strap included to secure the gas bottle
Durable baseplate with adjustable stainless steel locking bracket
Solid aluminium clamps and forged steel eye nuts
Can attach to the dovetail track at any point on the rack
Made from strong, powder-coated steel

JERRY CAN HOLDERS

It’s often essential to carry extra fuel or water on an off-road trip. Rest assured you can always be prepared with four jerry can holder sizes, perfect to suit your individual needs.

FEATURES

Allows easy fitment of two jerry cans per holder
Horizontal or vertical mounting options available
Secures to two beams (double horizontal & double vertical styles)
Secures to an individual beam or spans between beam (single & single vertical styles)
Solid aluminium clamps with forged steel eye nuts, strap included
Can attach to the dovetail track at any point on the rack
Holder made from strong, powder-coated steel
Powder-coated steel support plate (single horizontal & single vertical styles)
Provision for water tap (double & single vertical holder styles)

Hotspot 1

Flange cap assembly—Fully machined nodular iron flange cap incorporates the stationary side of ARB's tough, proven and patented timed locking mechanism.

Hotspot 2

Air supply—At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.

Hotspot 3

Clutch gear—ARB's patented locking system actually supports the side gear teeth, giving you more torque handling capability, exactly when you need it.

Hotspot 4

Cross shaft retaining pin—Custom made, one-piece hardened retaining pins lock into the assembly using a tapered thread junction.

Hotspot 5

Bonded seal—Steel reinforced, elastomer-bonded annular seal has been proven to handle 20,000+ cycles under the most extreme climatic temperatures on earth.

Hotspot 6

Two piece design—Machining a case from two pieces instead of three results in a much higher dimensional accuracy of the finished assembly and has allowed ARB engineers to improve the design of other elements, resulting in a reduction of moving parts, increased strength and a more responsive activation.

Hotspot 7

Pinion gear—Combining the strength of forged nickel alloy steel with redefined gear-tooth geometry, ARB has revolutionised locking differential gear design to yield structural advantages of up to 30% over commercially available high strength gears.

Hotspot 8

Spider block—A billet machined, alloy steel spider block supports the cross shafts, using the torque applied at each shaft to support the next shaft along.

Hotspot 9

Forged gears—With phenomenal forces being applied to the side and pinion gears within the differential, ARB has invested heavily in the application of forged gears, typically found in heavy duty commercial, race and agricultural transmissions.

Hotspot 10

Splined side gear—High grade surface treatments, forged nickel alloy steel and ARB's patented timed locking system make this the most ‘lockable’ gear in the industry.

Hotspot 11

Return spring—Instead of a complex external actuator system to engage/disengage the lock, ARB Air Lockers use up to 12 return springs to support the entire profile of the locking gear for a fast, positive and independent disengagement.

Hotspot 12

Diff case—Fully machined, one-piece nodular iron diff carrier case offers the rigidy of a one-piece factory differential with twice the standard number of pinion gears to cope with the torque.

Hotspot 13

Long cross shaft—Alloy steels and performance surface technology make for a high pressure running fit that can handle an enormous amount of punishment.

AVAILABLE OPTIONS

Double Horizontal

Double Vertical

Single Horizontal

Single Vertical

BASE RACK WIRING

Say goodbye to the hassle of complicated wiring setups. With ARB BASE Rack’s innovative development, their engineers have created a sleek wiring solution for your accessories. Now, you can easily route your wiring from inside the vehicle through the roof, whether it’s a vehicle or canopy.

ARB offers two convenient wiring kits for your needs. The first kit comes pre-wired with 6 sealed wires (3 circuits) already installed, ensuring a secure connection. Alternatively, the second kit provides provision for 6 wires, allowing you to customise the wiring according to your specific requirements.

Upgrade your roof rack experience with ARB BASE Rack’s efficient wiring solution!

FEATURES

Sealed wiring solution for passing wires through a vehicle roof
Seamless integration with ARB BASE Rack
Exit grommets to fit standard 10mm and 13mm OD conduit sizes
High quality automotive wire to JASO standards
Free from liquid adhesives
Disconnection kit to reseal roof exit points when rack is removed

AUXILIARY LIGHT

Ideal for reverse or area lighting, the BASE Rack Auxiliary Light seamlessly integrates with the BASE Rack dovetail system at any section of the rack, allowing for lighting wherever it is needed most.

Featuring two 10W OSRAM LEDs, this compact light throws out a wide lighting spread, resulting in clear images through a reverse camera, as well as the elimination of hot spots causing glare in the worksite or campground.

FEATURES

9v to 36v input
20W power consumption/1.5A
1,100 lumens @ 5700K
Compliance to IP69K, ECE, R10, CISPR 25/5 standards
BASE Rack brackets and DT connectors included
72.4mm wide and 56.2mm high (2.8” x 2.21”)

SHOVEL HOLDERS

With its unique 4 mounting positions, the ARB BASE Rack Shovel Holder can be fitted to all BASE Rack configurations allowing for various shovel or spade sizes and configuration of other BASE Rack accessories. A unique flip down, quick release retaining system was developed to ensure high clamping force and ease and speed of use. The custom designed retaining system is also lockable and UV stable for the harshest environments.

FEATURES

Suitable for 32-42mm (1.25-1.625”) handle diameters
5kg/11lbs weight capacity
Flip open design is suitable for both shovels and spades
Quick release system is fixed when not in use
Lockable with long shank padlock
Four mounting options for personal set up
Mounting brackets made from powder-coated stainless steel
Packer system improves fit of tapered handles and larger size handles
Retaining knob non removable, can’t be lost

SPARE WHEEL Y-STRAP

Securing a spare tyre to your roof rack has never been so simple!

Secure your spare wheel on your BASE Rack with ease, ready to tackle your next adventure. These effective ratchet strap systems secure the tyre in three points on the rack. One strap kit is available with conventional hooks and eye bolt mounts where the other uses a unique dovetail clip which offers a positive connection directly to the rack at all three points.

FEATURES

25mm polyester webbing
For use with BASE Rack without the need for additional tie-down points
150kg lashing capacity to AS/NZS4380:2001
Adjustable one-metre straps suit most tyre sizes
Supplied with carry bag

RATCHET STRAP (PAIR)

J-hook straps are known for disconnecting from your tie down point between attaching them and fastening them. These new BASE ratchet straps feature a dovetail profiled hook to offer a positive connection to the rack’s beams meaning no more impromptu disconnects, and no need for additional tie-down points.

FEATURES

3m x 25mm polyester webbing
For use with BASE Rack without the need for additional tie-down points
200kg lashing capacity to AS/NZS4380:2001
Set of two per pack
Supplied with carry bag

EYE BOLT TIE-DOWN (SET OF FOUR)

Secure your gear quickly and safely. From items such as timber and ladders to swags and camping gear, these eye bolt tie-downs are built tough to handle any load and terrain.

FEATURES

Provides a lashing point for ratchet straps
Design to stay securely on the BASE Rack when not in use
Can attach to the dovetail track at any point on the rack
Made from strong, powder-coated aluminium
Forged steel eye nuts
Set of four per pack

SPRING-LOADED TIE-DOWN (PAIR)

Quick-attach spring-loaded tie-downs are easy to use with a simple one-handed operation. Great for one-off needs and quick loading and unloading, these tie-downs twist on and twist off.

FEATURES

Quick attachment and release
Provides a lashing point for ratchet straps
Easy to attach to the roof rack
Designed to be taken off the rack when not in use by a simple half turn
Can attach to the dovetail track at any point on the rack
Made from strong stainless steel
Set of two per pack

T-SLOT ADAPTOR (SINGLE OR PAIR)

For the active outdoor adventurer. For use with your existing T-slot compatible accessories. From your bike carrier to your kayak holder, the T-slot adaptor bracket ensures you can easily attach anything to the BASE Rack.

FEATURES

Allows fitment of accessories from a range of roof rack manufacturers
Uses a standard T-slot channel to accept T-slot mounted accessories
Can attach to the dovetail track at any point on the rack
Available as single or pair

3 Years Warranty

ARB prides itself on creating the best products that offer quality, reliability and practicality above all else. Naturally all ARB products manufactured and distributed by us come with a three years nationwide warranty.

DEMANDING MORE ADVENTURES?

Go even further with our extensive range of compatible gears.

Bull Bars

ARB Bull Bars will provide substantially improved protection for vulnerable mechanical components against animal strikes.

SUSPENSION

Old Man Emu produces suspension to suit you, no matter your lifestyle.

Recovery Equipment

ARB’s vehicle recovery accessories are engineered and manufactured to the highest standards, making them ideal for recreational use as well as competition.

VEHICLE LIGHTING

ARB offers one of Australia’s most extensive selections of high-quality vehicle lighting.

Closer Look

The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own.

Warranty 3 years

Additional Info

Shipping Info & Returns

Warranty Policy

Environmental Impact

Ask an Expert

If you need any assistance, come have a chat with our ARB team. Learn more about this product, compatibility or help construct your dream vehicle.

ARB 4×4 Accessories Keilor Park

34 Commercial Place, Keilor East, 3033 VIC

03 9331 7333 Store Info

50 Years of Adventure, Innovation & Community

Fifty years of adventure, innovation, and forging new paths, ARB has come a long way, but the journey is far from over.

Thank you for being part of the ARB convoy! Here’s to many more tracks, trails, and adventures together!

JOIN THE ADVENTURE

Join our ARB community and receive exclusive rewards and updates

ARB BASE Rack Accessories

The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation.

BASE RACK ACCESSORIES

LIGHT BARS

Wind Deflector

Awning Bracket

Hi-Lift Jack Holders

Recovery Board Holder

Roller Kit

Gas Bottle Holder

Jerry Can Holders

Spare Wheel Y-Strap

Ratchet Straps

TIE-DOWNS

T-Slot Adaptor

BASE RACK WIRING

AUXILIARY LIGHT

SHOVEL HOLDER

EXPLORE ACCESSORIES

Available sizes

AVAILABLE OPTIONS

Double Horizontal

Double Vertical

Single Horizontal

Single Vertical

FEATURES

3 Years Warranty

DEMANDING MORE ADVENTURES?

Bull Bars

SUSPENSION

Recovery Equipment

VEHICLE LIGHTING

Closer Look

Additional Info

Compatible Gear

Ask an Expert

50 Years of 4X4

4X4 Culture

Popular Vehicles

Recently Viewed

Resources

About ARB

Contact ARB

ARB Regions