Safari has developed its new range of ARMAX products with vehicle performance and efficiency at the forefront. There are two main products in the ARMAX range: Snorkels and ECU’s.
The ARMAX Snorkel is designed to provide increased airflow to the vehicle airbox and the ARMAX ECU has been developed to improve on vehicle performance, with a simple plug and play set up.
The ARMAX range has been developed to provide more air flow to the air box when compared to a standard intake or traditional Safari snorkel.
Featuring a 4″ air ram and wider body, the ARMAX snorkel is suited for drivers wanting higher performance from their off road vehicle and works in harmony with all existing and future performance modifications.
A diff breather kit stops your differentials (as well as gearbox and transfer case) from sucking in water when driving through river crossings and large water hazards, leading to serious and expensive repairs.
As your vehicle’s differentials, gearbox and transfer case heat up under normal operation, the air inside expands and increases pressure in the casings. To manage this increase in pressure, most of these components come standard with a series of one-way-valve breathers to allow the pressure build-up to escape.
However, when you enter a river crossing or large water hazard, the cold water quickly cools the expanded cases causing them to quickly retract in size; this forms a vacuum effect on the breather valves.
One-way breather valves will not let any air in, and as a result, water will often be sucked in through your surrounding oil seals allowing water ingress into your casings, axles and differentials; leading to corrosion and serious damage.
To overcome these common issues, it is recommended to install a breather kit which acts similar to a snorkel for your differentials, gearbox and transfer case. The breather kit is primarily a hub which transfers air in and out of the critical vehicle components; the kit includes a length of air tubing which is run to a high point (usually under the vehicle’s bonnet) where it is most protected from dust and water ingress when drawing air back in.
Out of the box, the 4 port ARB Diff Breather Kit can be connected to all four key components (front diff, rear diff, transfer case and gearbox) and comes with enough tubing and fixtures to connect to the most common application of two differentials. With a small amount of additional tubing and fixtures (sold separately), the one kit will also accommodate your transfer case and gearbox.
Safari’s ARMAX ECU is designed to work harmoniously with your vehicles OE Engine Control Unit, resulting in more power, more torque, better throttle response, less fuel consumption and less turbo lag.
The ARMAX ECU is one of the very few aftermarket diesel 4×4 tuning products to provide calibration of the turbocharger’s air delivery (boost) as a standard element of the ECU’s function. This is extremely important as it is the only method of ensuring that the correct Air/Fuel ratio is maintained.
Designed in Australia and calibrated for Australian vehicles and conditions, the ARMAX ECU delivers a strong yet very smooth power enhancement, so that when the driver demands more power the ECU delivers more power.
Check out our latest magazine issue online
Discover ARB's all-new Slide Kitchen and more
View online or pick up in store
Subscribe to ARB to receive your regular 4x4 CULTURE magazine, exclusive ARB promotional news and new product release information.